Digital Lighting Systems, Inc                  

Home Products Prices $ Technical Info Contact us About

     

DT-AN10-PWM  converts a 120 VAC dimmer output to 0-10V signal & switch or PWM dimmer for LED & other 12 VDC or 24 VDC devices

PWM FUNCTION:
 

Converts dimming signal from standard 120 VAC dimmer

to Pulse Width Modulated PWM dimmer for LED .
 

PWM INPUT :14 to 24 VDC @ 10 Amps Max.
PWM OUTPUT : PWM dimmer 10 Amps Max.

1-10V FUNCTION:


Converts dimming signal from standard 120 VAC dimmer to a sinking 1-10V signal to control up to 25 x 0-10V dimmable devices.
 

INPUT: 14 to 24 VDC @ 300 mA.
OUTPUTS : 1-10 V control sinking 25 mA.( 25 x 1mA. 1-10V dimmable devices ) & 5 Amps 12 VDC minimum level switch.

Converter retrofit :

PWM FUNCTION: For dimming Constant Voltage LED in existing installations with existing 120 VAC dimmers.

1-10V FUNCTION: For converting a 120 VAC dimming output to a 1-10 V dimming signal to control 1-10V dimmable LED drivers and Fluorescent ballasts  ( minimum voltage will be 0.9V at full 25 mA load , 0.6V at 2 mA load. )

Note that Dimming curve response will differ among Wall dimmers,

DT-AN10-PWM Dimmer outputs might need a dummy resistive load. range 3000 OHM to 6000 OHM/ 5 Watts connected to the load output of the  120 VAC Wall dimmer. 

                      PROVIDED AS PC BOARD ONLY WITHOUT ENCLOSURE

                      PC board Dimensions : 4.80" x 1.90"

 

DT-AN10-PWM User manual                           $ 78.00

Go green use LED lights with LED dimmers to save energy and the environment.

Digital Lighting Systems,inc. : (305) 969-8442,         [E-mail Us]

BACK TO VDC dimmers                          BACK TO DLS HOMEPAGE