PSF08  Base / FPF02 cover

PSF08  Base / FPF04 cover

PSF08  Base / FPF06 cover

The PSFxx keypad wall control stations are the user interface to the PROTOCOL dimming system. The PSFxx connects to the PROTOCOL DATA & Logic power Bus via 2 twisted pairs. 

The PSF Series lighting control Stations may be ordered preprogrammed or may be easily programmed on-site with the PROSOFT configuration software.

One Station can be configured to have up to 16 different control buttons. Each control button could be configured to control from one load to the whole system.

The Protocol PSFxx Wall control Stations are low profile flush mount and have no visible mounting hardware. The number of buttons on each wall station could be easily modified after installation by removing or adding buttons.  Buttons installation

The  buttons on the same station can be assigned to be a combination of switches, dimmers, presets ( scenes) to control individual or groups of Lighting circuits ( Zones). 

The Presets ( scenes) can be programmed on site from the Station without the need of any additional devices or a PC.

All control Stations can be ordered with an optional Infrared Receiver and can be activated with any Universal Infrared Remote control.

(The IR Code used is the one for an RCA brand VCR )

 PSFxx Wall keypad control Stations Specifications Sheets

PSF08-IR Base / FPF08-IR cover

PSF16 Base / FPF12 cover

PSF16 Base / FPF16 cover

All single-gang keypad Stations have a PSF08 ( 8 switches ) base and can accept:

FPF02 ( face plate with 2 buttons)

FPF04 ( face plate with 4 buttons)

FPF02 ( face plate with 6 buttons)

FPF02 ( face plate with 8 buttons)

All double-gang keypad Stations have a PSF16 ( 16 switches ) base and can accept:

FPF12 ( face plate with 12 buttons)

FPF16 ( face plate with 16 buttons)

Face Plates are available in:

1. WHITE pre finished aluminum ( could be repainted by user with other colors)

2. Stainless steel with a brushed finish

White, Black, Gray, Red, Green, Blue, Orange, Yellow.