1. This interface allows an optically isolated connection of up to 16 Dry contact switches or relays  to the PROTOCOL bus.

2.  It is equivalent to a PSF16, 16 button control station and is addressed the same way.

3. A combination of a total of 99 DCI-16 or PSF16 may be installed in any one system.

4. The DCI-16 is configured in the same manner as a PS Series station and every contact closure  may be programmed as a scene preset or a zone control  like a station button.

Use any custom buttons to Switch or Dim the lights or interface to other equipment such as Alarms, Audio visual, movie projectors, etc... with dry contact outputs to trigger preset Lighting scenes.

To view the specifications for the DCI-16, click the following link.

DCI-16 Specifications (PDF)

1. This interface has four optically isolated dry contact relay outputs controlled from the PROTOCOL bus.

2. It is the equivalent to a PDxxx 4 output module and is addressed the same way.

3. A combination of a total of 63 addressed DCO-4's or PDxxx dimmers may be installed in any one system.

4. The DCO-4 is configured in the same manner as a PDxxx dimmer pack  to switch up to 2 Amps loads directly or to trigger other devices.

Use to trigger other electronic devices such as Audio-Visual Systems, Alarms, HVAC, etc...

To view the specifications for the DCO-4, click the following link.

DCO-4 Specifications (PDF)