DMX Dimmers and Switch Packs

( PWM Dimmers for LED & other Direct Current Voltage devices) All products manufactured in the USA

The PWM-R44 is a repeater amplifier for up to 4 PWM dimmers.PWM-R44 dimmers repeaters are used to synchronize Multiple Loads on different power supplies without the need to have control cables. They could connect in tandem from load to load or in parallel sharing the same signal from master PWM Dimmer outputs.

The PWM-R44 connects to up to 4 Pulse width modulation ( PWM ) dimmer outputs and precisely regenerates the Outputs to control additional loads. An infinite number of 4 channel or RGB loads could be dimmed in parallel and up to 20 could be could dimmed in Tandem.

PWM-R44 4 channel PWM dimmers repeater. 8 Amps Maximum total loads @ 8 to 24 VDC Wiring manual

MAIN FEATURES

Compact 4-channel DMX512 PWM repeater Dimmer / switch Module

PULSE WIDTH MODULATION ( PWM ) DIMMERS POSITIVE COMMON

Mosfet outputs do not need heat sinks.

Stable flicker free full range dimming.

Precise reproduction of input dimming signal

Compatible with all PWM Constant Voltage dimmers with outputs 8-24 VDC.

Simple to Install and Operate.

Two Year Limited Warranty on Parts and Labor.

Dimmer repeater for L E D and VDC Loads.

Used for Multi runs of LED strips to be controlled from one PWM dimmer up to 4 zones. ( 4 colors RGBW )

supplied as a Printed Circuit Board Module

PWM-R44

SPECIFICATIONS

Dim or switch up to 4 separate loads

5 A. Max each dimmer ; 8 A. total loads
Constant VDC range : 8VDC to 24 VDC
PULSE WIDTH MODULATION ( PWM ) control input frequency 0 to 2000 Hz.
Common Anode ( + ) , cathode (-) outputs. PWM DIMMERS.
screw terminals for control inputs
screw terminals for outputs connections.
compatible with all PWM dimmers
compact Size: 3.6"x1.8"x0.75" PCB with no enclosure.

List price $59.00 Made in USA

Go green use LED lights with LED dimmers to save energy and the environment.