Digital Lighting Systems, Inc           

Home Products Prices $ Technical Info Contact us

DT-AN10-PWM  converts a 120 VAC dimmer output to 0-10V signal & switch or PWM dimmer for LED & other 12 VDC or 24 VDC devices


Converts dimming signal from standard 120 VAC dimmer

to Pulse Width Modulated PWM dimmer for LED .

PWM INPUT : 12 to 24 VDC @ 10 Amps Max.
PWM OUTPUT : PWM dimmer 10 Amps Max.


Converts dimming signal from standard 120 VAC dimmer to a sinking 0-10V signal to control up to 50 0-10V dimmable devices.

INPUT: 12 to 24 VDC @ 300 mA.
OUTPUTS : 1-10 V control 30 mA. & 10 Amps switch.

Converter retrofit :

For dimming Constant Voltage LED in existing installations with 120 VAC wiring and wall dimmers.

For converting a 120 VAC dimming output to a 0-10 V dimming signal to control 0-10V dimmable LED drivers and Fluorescent ballasts ( Mark 7,... )

Note that Dimming curve response will differ among Wall dimmers,

DT-AN10-PWM Dimmer outputs might need a dummy resistive load of 5 Watts minimum connected to the 120 VAC Wall dimmer. 


                      PC board Dimensions : 4.80" x 1.90"


Wiring diagram DT-AN10-PWM dimmer converter                             $ 78.00

Go green use LED lights with LED dimmers to save energy and the environment.

Digital Lighting Systems,inc. : (305) 969-8442,       [E-mail Us]

BACK TO VDC dimmers                          BACK TO DLS HOMEPAGE